Infiniti Integrated HomeLink Programming

2. Clear all channels by pressing both outside buttons at the same time on HomeLink and hold until red indicator light blinks rapidly 
    (approximately  20 seconds), then release.

3. Program HomeLink with your hand-held transceiver.

    Press the button you want to program, and activate the hand-held transceiver until "red indicator light" blinks 'slowly'
     (programming mode, hold buttons down).

4. Continue holding down HomeLink and hand-held transceiver buttons until red indicator light blinks 'rapidly'
    (this may take 1-30 seconds), then release. You can now use HomeLink instead of you hand-held transceiver.

Note: If more transceiver needs to be program, repeat steps 3 and 4 in a different button on the sunvisor's HomeLink