1. Using a suitable plastic pry tool, carefully pry up the Cluster Lid Finisher to release the securing clips

NOTE: Place a suitable protective cover (clean shop rag,) under the plastic pry tool to protect the instrument panel.

2. Remove the Cluster Lid Finisher from the instrument panel by pulling it rearward to release the securing clips

3. Remove two screws from the Clock Assembly

4. Disconnect Clock Assembly connector.

5. Replaced Bulbs

Infiniti G35 / G37 Coupe DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	Detailing
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	MIL & Engine Codes
Infinitihelp.com Knowledgebase
Infiniti G Coupe Bulletins	Infiniti G Coupe Campaigns/Recalls	Infiniti G Coupe Reference Specifications	Tips & Articles
Infiniti G Coupe Service Manuals	Infiniti G Coupe Owner's Manuals	Infiniti G Coupe Navigation System Manuals	Infiniti G Coupe Towing Guides
Infiniti G Coupe Warranty Booklets	Infiniti G Coupe Factory Accessories Installation Guides	Infiniti G Coupe Maintenance Schedules	Infiniti G Coupe Forums
Infiniti Repair Cost Estimator	Infiniti OBDII Code Chart	Glossary of Automotive Terms by HelpForCars.net