click image to see it larger

1. Remove mask of inside handle portion and remove screws.

2. Insert taping flat-bladed screw driver into edge portion, disconnect pawls, and remove grip finisher.

click image to see it larger

click image to see it larger

click image to see it larger

3. Remove screw of grip portion

4. Insert driver rolled with cloth between panel on vehicle and clips (as indicated with arrow), and remove finisher.

click image to see it larger

5. Pull up door finisher, and remove power window switch and electrical parts connectors.

6. Remove lock knob cable and inside handle cable of inside handle assembly back side.

7. Remove inside handle screws, and remove it from finisher.

click image to see it larger

Infiniti G35 / G37 Coupe DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Factory Accessories Installation Guides
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	MIL & Engine Codes