Click image to see it larger

1. Fully open hood assembly.

2. Remove clips (A) of front bumper fascia upper side.

Click image to see it larger

3. Remove radiator core support ornament.

4. Remove clips (A) of hood seal assembly (side) LH/RH with remover tool (B), and then remove hood seal assembly located front portion.

Click image to see it larger

5. Remove bolts (A), and then remove bumper bracket (1).

Click image to see it larger

6. Remove bolts (A) of fixing engine lower cover and front fender protector.

Click image to see it larger

7. Remove fender protector (front) mounting bolts and clips, and then remove screw (A) of fixing bumper fascia left and right side.

Click image to see it larger

8. Pull the bumper fascia side toward the vehicle side to disengage the fitting of bumper side bracket and bumper fascia side.

Click image to see it larger

9. Remove bumper fascia assembly.

Click image to see it larger

Infiniti G35 / G37 Coupe DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	Detailing
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	MIL & Engine Codes
Infinitihelp.com Knowledgebase
Infiniti G Coupe Bulletins	Infiniti G Coupe Campaigns/Recalls	Infiniti G Coupe Reference Specifications	Tips & Articles
Infiniti G Coupe Service Manuals	Infiniti G Coupe Owner's Manuals	Infiniti G Coupe Navigation System Manuals	Infiniti G Coupe Towing Guides
Infiniti G Coupe Warranty Booklets	Infiniti G Coupe Factory Accessories Installation Guides	Infiniti G Coupe Maintenance Schedules	Infiniti G Coupe Forums
Infiniti Repair Cost Estimator	Infiniti OBDII Code Chart	Glossary of Automotive Terms by HelpForCars.net