1. Remove the Door Panel. 2003-2005 Front Door Panel Removal Procedure

2. With the door open, lift UP and HOLD the Window Switch until the Window is fully closed.

• Do not use the Window auto-closing function

• Do not release the Switch before the Window is fully closed

3. Get inside the vehicle and close the door.

• You need to close the door so the Door Switch is fully depressed

4. Press and HOLD the Window Regulator Motor Reset Switch. While holding the Reset Switch, press DOWN and HOLD the Window Switch until the Window is fully opened.

• Do not use the Window auto-opening function

• Do not release the Switch before the Window is fully opened

Click image to see it larger

5. Release the Reset Switch. Then, lift UP and HOLD the Window Switch until the Window is fully closed.

• Do not use the Window auto-closing function

• Do not release the Switch before the Window is fully closed

6. Open the Door to release the Door Switch. The Window Glass should partially move down.

7. Re-install the Door Panel.

Infiniti G35 / G37 Coupe DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	Detailing
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	MIL & Engine Codes
Infinitihelp.com Knowledgebase
Infiniti G Coupe Bulletins	Infiniti G Coupe Campaigns/Recalls	Infiniti G Coupe Reference Specifications	Tips & Articles
Infiniti G Coupe Service Manuals	Infiniti G Coupe Owner's Manuals	Infiniti G Coupe Navigation System Manuals	Infiniti G Coupe Towing Guides
Infiniti G Coupe Warranty Booklets	Infiniti G Coupe Factory Accessories Installation Guides	Infiniti G Coupe Maintenance Schedules	Infiniti G Coupe Forums
Infiniti Repair Cost Estimator	Infiniti OBDII Code Chart	Glossary of Automotive Terms by HelpForCars.net