1. Remove undercover glove box under cover.

Grab the cover from the holes on the cover and pull the cover out.

click image to see it larger

2. Remove glove box.

Remove the screws shown on the figure and then pull out glove box.

click image to see it larger

3. Remove instrument reinforcement from instrument panel.

click image to see it larger

4. Remove ventilation air filter fixed clip.

click image to see it larger

5. Take out the lower side ventilation air filter from cooling unit.

6. Then slide upper side filter to the bottom position and take off the ventilation air filter from the cooling unit.

7. Replace with new one and reinstall on cooling unit.

8. Reinstall instrument reinforcement, glove box and undercover.

 

Infiniti Q45 DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	Detailing
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	MIL & Engine Codes
Infinitihelp.com Knowledgebase
Infiniti Q45 Bulletins	Infiniti Q45 Campaigns/Recalls	Infiniti Q45 Reference Specifications	Tips & Articles
Infiniti Q45 Service Manuals	Infiniti Q45 Owner's Manuals	Infiniti Q45 Navigation System Manuals	Infiniti Q45 Towing Guides
Infiniti Q45 Warranty Booklets	Infiniti Q45 Factory Accessories Installation Guides	Infiniti Q45 Maintenance Schedules	Infiniti Q45 Forums
Infiniti Repair Cost Estimator	Infiniti OBDII Code Chart	Glossary of Automotive Terms by HelpForCars.net