2003-2012 Infiniti FX35 - FX45 Accelerator Pedal Released Position Learning Procedure

Accelerator Pedal Released Position Learning is an operation to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time harness connector of accelerator pedal position sensor or Engine Control Module (ECM) is disconnected.

Instructions

• 1
  Make sure that accelerator pedal is fully released.
• 2
  Turn ignition switch ON and wait at least 2 seconds.
• 3
  Turn ignition switch OFF and wait at least 10 seconds.
• 4
  Turn ignition switch ON and wait at least 2 seconds.
• 5
  Turn ignition switch OFF and wait at least 10 seconds.

Infiniti FX35 / FX45 / FX50 DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Factory Accessories Installation Guides
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System