2003-2008 Infiniti FX Front Rotors Removal and Brake Pads Replacement Procedure

Instructions

• 1
  Remove tires from vehicle
• 2
  Fasten disc rotor using wheel nut
• 3
  Remove bottom caliper bolt (14 mm) and slide out the caliper
• 
  Click image to see it larger
• 
  Click image to see it larger
• 
  Click image to see it larger
• 4
  Remove caliper torque member bolts (19 mm) and remove brake caliper assembly from the vehicle.
• 
  Click image to see it larger
• 
  Click image to see it larger
• 
  Click image to see it larger
• At this point you may installed the new rotor or prepare the old rotor to resurface
• 
  Click image to see it larger
• 
  Click image to see it larger
• 5
  Install in reverse procedure.
• 6
  Before start driving your FX, press the brake pedal several times
• Notes:
• When installing the brake pads make sure the brake pad clip is at the bottom
• 
  Click image to see it larger
• Lube caliper sliding pins
• 
  Click image to see it larger
• When tighten the caliper bolt, use another wrench to hold
• 
  Click image to see it larger

Infiniti FX35 / FX45 / FX50 DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Factory Accessories Installation Guides
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System