2003-2012 Infiniti FX35 - FX45 Throttle Valve Closed Position Learning Procedure

Throttle Valve Closed Position Learning is an operation to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time harness connector of electric throttle control actuator or Engine Control Module (ECM) is disconnected.

Instructions

• 1
  Make sure that accelerator pedal is fully released.
• 2
  Turn ignition switch ON.
• 3
  Turn ignition switch OFF and wait at least 10 seconds
• a
  Make sure that throttle valve moves during above 10 seconds by confirming the operating sound.

Infiniti FX35 / FX45 / FX50 DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Factory Accessories Installation Guides
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System