2003-2006 Infiniti G35 Sedan Door Panel Removal Procedure

Instructions

Procedure

• 
  Click image to see it larger
• 1
  Remove mask of inside handle portion and remove screws
• 
  Click image to see it larger
• 2
  Insert taping flat-bladed screw driver into edge portion, disconnect pawls, and remove grip finisher.
• 
  Click image to see it larger
• 
  Click image to see it larger
• 3
  Remove screw of grip portion.
• 
  Click image to see it larger
• 4
  Insert driver rolled with cloth between panel on vehicle and clips and remove finisher.
• 
  Click image to see it larger
• 5
  Pull up door finisher, and remove power window switch and electrical parts connectors.
• 
  Click image to see it larger
• 
  Click image to see it larger
• 
  Click image to see it larger
• 6
  Remove lock knob cable and inside handle cable of inside handle assembly back side.
• 7
  Remove inside handle screws, and remove it from finisher.
• 8
  Install in the reverse order of removal.

Infiniti G35 / G37 Sedan DIY Projects
Modifications	Engine & Transmission	Air Bag & Body Exterior/Interior	OEM Factory Accessories Installation Guides
Electrical, Audio & Navigation	Heater & Air Condition	Suspension, ABS, Brakes & Tires	Engine Control System